Sim Update 14 veröffentlicht

Am Mittwochabend ist die finale Version des Simupdates 14 erschienen. Der erwartete A320 von iniBuilds wurde vor einigen Wochen aus der Betaversion entfernt und, wie schon von vor ein paar Tagen berichtet, von Asobo und iniBuilds vorerst auf Eis gelegt.

Neues im SU 14 ist eine voll funktionsfähige SR22 GT6, die mit funktionierendem MFD (G1000), dass von Working Title umgesetzt wurde. Außerdem wurden die Farben des Himmels so angepasst, dass dieser weniger grün aussieht. Der bekannte Skycolor Fix ist damit nun obsolet. Den vollen Forumpost gibt es hier.

HINWEIS: Derzeit kommt es vermehrt zu massiven Einschränkungen im Download, wobei dieser immer wieder pausiert. Ihr könnt den Download aber weiterlaufen lassen, bis dass dieser abgeschlossen ist

Den vollen Changelog gibt es hier:

RELEASE NOTES 1.35.21.0

NEW CONTENT/FEATURES

Added flight plan assistance setting for ATC in the user experience assistance settings so that users can request the ATC to favor their flight plan or world map flight settings over the current conditions. This assistance is set to “Active” by default. Active: ATC will set the active runway and approach for the departure and arrival airport based on the users flight plan or settings in the world map. Deactivated: ATC will set the active runway and approach based on current conditions only.
ATC now clears a step to the next altitude some time before arriving at the previously cleared altitude, rather than once arrived at the previously cleared altitude. (Next step is issued when at 2000FT from cleared altitude rather than 250FT from cleared altitude).
ATC Vectoring bug fixes:
1. Now assigning the correct clearance when the first two waypoints were one over the other,
2. Now assigning a new vector & clearance every time the user asks the ATC for a new vector.
Added completely new Cirrus SR22T G6 model with custom engine simulation, book-accurate performance, and extensive Perspective Plus NXi features.

GENERAL BUG FIXES

Several crashes have been fixed across the title
Fixed localization bugs
Performance optimizations for long flights.
Fixed ATC that was mixing voices in localized languages
Automated Weather Report temperature reading updated

MARKETPLACE

Fixed an issue where the Wishlist would not sort properly in the Marketplace

NAVIGATION/TRAFFIC

Enhanced ATC phraseology. Some of the improvements include:
- The removal of the word ‘for’ in altitude change requests.
- Eliminating the requirement to include altimeter settings in takeoff clearances.

WEATHER

Snow and ice coverage accuracy has been improved in live weather
Fixed an issue where the wind from a malformed METAR was incorrectly read
Fixed an issue where the sim occasionally retrieves obsolete weather data
Improved transition during cloud coverage updates AND fixed an issue where clouds don’t load when starting a flight.

GLASS COCKPITS

GARMIN G3000 / G5000

Fixed an issue where removing an airway entry leg from the flight plan could sometimes corrupt the flight plan.

G1000 NXI

Added support for hardware keyboard with new AS1000_CONTROL_PAD_ H events.
Fixed an issue where removing an airway entry leg from the flight plan could sometimes corrupt the flight plan.
AP: Added support for LVL and TO/GA modes
MFD: Added Page Menu popup for MFD’s Nearest Airports page.
CAS: PFD Alerts softkey indicator now flashes color and changes to appropriate label with CAS messages
CAS: Pressing PFD Alerts softkey now acknowledges CAS messages and cancels aural chimes
CAS: Alerts now display in order of priority and time first seen
SIM: Added support for knob-based XPDR code entry using H events.
For aircraft developers:
- Made all methods in PFD and MFD plugins optional.
- Exported NavSystems’s class FrequencyItem and its props interface FrequencyItemProps.
- CAS messages may now be assigned associated Alerts messages via JS and/or plugin code
- Added support for control pad entry for Constraint Selector in the FPL dialog
- Added support for LVL and TO/GA autopilot modes
- Added support for control pad entry on several UI input components
- Added support for styling the Com selection based on the radio selected to transmit, and for both Nav and Com standby frequencies selected to edit

WT21

For aircraft developers:

Added configurable side button support to the WT21

AIRCRAFT

GENERAL

Payload station weights that are set via SimConnect are now properly displayed in the Weight&Balance toolbar panel.
Fixed – L-39 Pipsqueak – Unable to enter values by double-clicking on GNS screen
Fixed – L-39 Sarance – Unable to enter values by double-clicking on GNS screen
Contact Points compression under some kind of roof (bridge, cave, arch, etc.) was fixed
Fixed – P-51D LadyB – Unable to enter values by double-clicking on GNS screen
Aircraft Registration can no longer be lowercase
Fixed – P-51D Miss America – Unable to enter values by double-clicking on GNS screen
Fixed – P-51D Strega – Unable to enter values by double-clicking on GNS screen
Fixed – T-6 Baby Boomer – Unable to enter values by double-clicking on GNS screen
Improved aircraft simulation stability (few potential crashes were fixed)
Fixed – T-6 Undecided – Unable to enter values by double-clicking on GNS screen
Corrected an issue that could prevent cockpit interactions from working in some rare conditions
Correct many false positive errors regarding InputEvents when loading AI planes
Corrected an issue that would cause some P51 to lose power in reno races.
Fixed an issue that could cause the state of Avionics circuit depend features to be toggle on and off when no MarkerBeacon circuit was present
It is now possible to slow down the simulation speed to 1/8 and 1/16 of real time.

EXTERNAL HUD

Minimized HUD can now display more than 8 engines power values

HELICOPTERS

Anti-stall protection is now disabled for helicopters.

AIRBUS 310-300

A310 Radio Stuck Broadcasting on KSNS ATIS After Departing KSFO.
Vertical speed knob labeled as “altitude knob” in tooltip.

AIRBUS A320NEO (V2)

During testing of the A320neo, we encountered an application crash rate on console that is too high to pass certification. We need to address this issue before the A320 can ship.

BELL 407

Rotor weight changes.
Rotor brake force adjustments.
Rotor blade dynamics adjustments.
Throttle/governed RPM during startup and shutdown.
Engine performance changes.
Fuel management on the weight and balance settings.
Performance data on the aircraft selection screen.
Localization text changes.
FADEC tooltip.
Fuel Pressure gauge illumination.
Cold and dark state changes.
Checklist correction.
Fixed checklist AutoStart. AutoStart sequence now works.

BOEING 787-10 / BOEING 747-8I

General performance optimizations for consoles and some hardware configurations
W&B: An operational CG margin is considered now to avoid extreme CG values when loading the aircraft.
SIM: ATC will now know about your planned cruise altitude and will assign you a flight level accordingly.
CHECKLISTS: Fixed bug where checklists that only contain closed loop items would sometimes be skipped when entering the checklist page if all items are completed.
[787] CHECKLISTS: Fixed flaps checklist items being completed before the flaps reached the selected position.
[787] W&B: Corrected movement of the CG as fuel is burned by moving the tanks to the exact locations of those on the real plane.
[787] EFB: Support clearing of the TOW field.
[787] EFB: Cap the achievable MTOW at the certified limit of the plane.
[787] EFB: Correct error message when current TOW exceeds the achievable MTOW.
[787] EFB: Added Automatic brightness adjustment.
[787] EFB: Fixed spelling errors.
[747] SYSTEMS: Reserve fuel transfer will now not stop once started mid flight.
CDU: Fix takeoff speeds being invalidated when opening TAKEOFF REF on the copilot side

CESSNA CITATION CJ4

SIM: ATC will now know about your planned cruise altitude and will assign you a flight level accordingly

CIRRUS SR22T G6

Completely brand-new art and model of the SR22T G6 GTS.
Completely reworked flight model and performance featuring:
- CFD with book accurate performance and pilot tested handling.
- Modern propeller system.
- New turbo and fuel engine systems.
- Custom ECU, engine computer, and EGT/CHT simulation.
- Custom lean misfire, detonation, and engine failure simulations.
Full Perspective Plus features implemented for G1000 NXi, including:
- Full-screen engine page with anti-ice status and fuel flow targets.
- Full-screen fuel management page.
- Weight and Balance page with graphical CG envelope.
- Trip planning page with automatic and manual modes.
- Massive suite of interactive checklists.
- MFD destination inf-box.
- PFD power gauge, GAGL indicator, GS and TAS.
- Frequency loading menus on airport and waypoint inf-pages.
FIKI (Flight int-Known Icing) and TKS simulation.
Stabilized approach system with PFD alerting and monitoring for:
- Bar-mismatch, crosswind, tailwind, flaps, lateral deviation, and vertical deviation (GS and GP).
Updated EIS with custom reversionary mode version.
Lean assist, fuel flow green band, and cyan fuel flow lean target indicators.
Fully modeled GCU479 Garmin Control Unit keypad with all entry modes.
Additional new autopilot mode support including LVL, TO, and GA.
Large suite of accurate CAS messages including new G1000 NXi alerts acknowledgement and menu behavior.

CURTISS JN-4 “JENNY”

Fixed – [KO-KR] Some instruments in cockpit are not localized in Korean in Curtiss Jenny.
Fixed – [Localization] Livery names are not localized in liveries page.
Fixed – [pl-PL] Missing/untranslated words in checklist.
Fixed – [TR-TR] Some instruments in cockpit are not localized in Turkish in Curtiss Jenny.

DAHER TBM 930

Fixed broken autopilot panel backlighting.

DOUGLAS DC-3

Fixed starting engine in Multiplayer causes other DC3 engines to animate starting
Fixed overlapping words on the warning labels inside the cabin and on the rear cabin door. (Enhanced)
Fixed Radio altimeter appearing off above 400ft.
Classic 8-way Quick view controls fixed during flight.
Fixed fuel pump does not indicate fuel flow from Cold/dark until after mesh switch is engaged. (Enhanced)
Improved low resolution text in the Enhanced Edition cockpit. (Enhanced)
Fixed missing panel texture for Beacon light. (Enhanced)
Fixed HUD not correctly indicating state of flap.
Fixed Decision height/Radar altitude setting knob setting does not match panel texture.
Fixed fuel pump not indicating fuel flow from Cold/dark until after mesh switch is engaged.

GRUMMAN G-21 GOOSE

AI copilot completes checklist items for you in Evaluation mode.
Attitude Indicator doesn’t provide pitch indications.
Fuel drawn from wrong tank when starting Cold & Dark.
Part of tooltip description for Magneto Cutoff not localized.
Unable to toggle “taxi light” in cockpit–must use key binding.

H-4 HERCULES “SPRUCE GOOSE”

Camera Quick views fixed
Engine 5-8 throttle fixed when using a gamepad

ROBIN DR400

Fix Flaps looking misaligned with the wings in neutral position.

RYAN NYP “SPIRIT OF ST. LOUIS”

Camera Quick views fixed

WRIGHT FLYER

Camera Quick views fixed

WORLD

Used more realistic mapping of wave lengths onto RBG values for the ozone layer scattering and the sun color, resulting in more realistic colors of the sky and the lighting in the world.

TOP-GUN MAVERICK

Fix for the aircraft carrier wake in Maverick landing challenge that was missing

PERIPHERALS

Various peripheral fixes
Pause mapping on the Occulus touch left controller switched from Y to Menu button
Anti Ice and Aux Fuel Pump LEDs are now working properly with Bravo Throttle Quadrant

SDK

Added new Coherent calls SET_CRUISE_ALTITUDE and GET_CRUISE_ALTITUDE to get/set the planned cruise altitude the in game ATC knows about.
Fixed crash when “positive_g_limit_flaps_up” parameter is present in [AIRPLANE_GEOMETRY] section in flight_model.cfg, but one of the parameters: “positive_g_limit_flaps_down” or “negative_g_limit_flaps_up” or “negative_g_limit_flaps_down” is missing. See SDK for details.
More parameters have been added to the “[VIEWS]” section of the “camera.cfg” file to control the behavior of the external camera (“external_camera_distance”, “external_camera_follows_heading”, “external_camera_follows_velocity”). See SDK for details.
Several features have been added and bugs have been fixed for the skid-type landing gear, which can now be retractable. See SDK for details.
Added “set_max_compression” and “spring_exponential_fix” parameters to the “[CONTACT_POINTS]” section of the “flight_model.cfg” file. See SDK for details.

DEVMODE

Debug old: option to disable 30Km mesh display limit
“Exponential Constant” parameter is added to the Contact Point serialization (it was missed)
Aircraft debug windows stability was improved
Fixed context setting of Material Editor when opening Scenery Editor
Added Interactive Points state initialization via .FLT files
The “gear_locked_on_ground” parameter in the [CONTACT_POINTS] section of the “flight_model.cfg” file now works for SKI and SKID type retractable landing gear.
Fixed random crash when exiting the game with DevMode open
AssetReload: Reload gltf lod min size
Fixed some scenery option not applied during multiple selection
Add SpeakerFullName in DialogAction
Improved linear memory size formatting in WASM Debug window

SIMCONNECT

SimConnect Input Events function can now be used while devmode is disabled
SimConnect Input Events shouldn’t crash the sim after going back to main menu (or restarting a flight)
Ident and region are now two separate fields while requesting Facilities
New Data are available through NavData API (Pavement, Vasi, Approach Lights)

SIMVARS

Added simvars AIRCRAFT_AGL and AIRCRAFT_ALTITUDE_ABOVE_OBSTACLES Aircraft editor
Added an option to delete a parameter from the cfg file, or to reset it to its default value
Added rotation Gizmo
Added new parameters
Added expert Mode to the editor. Expert Mode eliminate all constraint on the editor regarding conditional fields, required parameters or array sizes. Only already existing parameters and modified parameters are saved. This mode allows for greater flexibility of the editor but require more knowledge on how to configure an aircraft.
Made NdArrays more flexible, avoid writing too much data per line.
Fixed ctrl+f focus that would not focus parameters properly
Fixed unwanted or incorrect changes when saving a file in the editor

VISUAL EFFECTS EDITOR

Fixed visual effect instances not being properly stopped and restarted when the Visual Effects Editor is closed
New fixed orientation feature
New nodes: Abs, Sin, Cos

WASM

Fix clipping modes (intersect, complement and Xor) for GDI+ API
Fix an error in the dependencies of the VFX Aircraft Sample (and rename the sample from “SampleWasmModule” to “VfxWasmModule”)
Fix a bug in CommBus API that cause first registration of an event in Wasm to be ignored
CommBus : When register an event in Wasm the triplet [eventName, callback, ctx] can be registered only one time per module
CommBus : New function added in Wasm : fsCommBusUnregisterOneEvent
CommBus : In JS a CommBusListener has been added